![]() |
The standard configuration for a vertical stack (offense and force/one-to-one defense) |
One of the most common offensive strategies is the Vertical Stack. In this strategy, the offense lines up in a straight line along the length of the field. From this position, players in the stack make cuts (sudden sprints out of the stack) towards or away from the handler in an attempt to get open and receive the disc. The stack generally lines up in the middle of the field, thereby opening up two lanes along the sidelines for cuts, although a captain may occasionally call for the stack to line up closer to one sideline, leaving open just one larger cutting lane on the other side.
Another popular offensive strategy is the Horizontal Stack. In the most popular form of this offense, three handlers line up across the width of the field with four cutters upfield, spaced evenly across the field. This formation encourages cutters to attack any of the space either upfield or downfield of the stack, granting each cutter access to the full width of the field and thereby allowing a degree more creativity than is possible with a vertical stack. If cutters cannot get open, the handlers swing the disc side to side to reset the stall count and in an attempt to get the defense out of position.
A variation on the horizontal stack offense is called a Feature, or German. In this offensive strategy three of the cutters line up deeper than usual (this can vary from 5 yards farther downfield to at the endzone) while the remaining cutter lines up closer to the handlers. This closest cutter is known as the "feature", or "German." The idea behind this strategy is that it opens up space for the feature to cut, and at the same time it allows handlers to focus all of their attention on only one cutter. This maximizes the ability for give-and-go strategies between the feature and the handlers. It is also an excellent strategy if one cutter is superior to other cutters, or if he is guarded by someone slower than him. While the main focus is on the handlers and the feature, the remaining three cutters can be used if the feature cannot get open, if there is an open deep look, or for a continuation throw from the feature itself. Typically, however, these three remaining cutters do all they can to get out of the feature's way.
A third common offensive strategy is the Spread, or Split Stack. The spread offense features three handlers in the same formation as for a horizontal stack, and four downfield cutters. Cutters split into two-person teams near both sidelines at the same distance from the handlers as in the horizontal stack. The first cut can come from either sideline, then usually moves into the center of the field before moving upfield or downfield. The second cut can also come from either sideline, and will usually cut in the opposite direction (downfield or upfield) as the first cut. The spread strategy creates a large lane in the middle of the field in which the active cutter is looking to make one big play in or out before clearing back to one of the sidelines.
A fourth, less common strategy is called the Hybrid, because it creates two-person teams of cutters just as in the split stack, but one of these two-person teams plays as a vertical stack on one side of the field. Handlers arrange themselves as in a horizontal stack. The advantage of the hybrid is that one of the two-person teams makes use of the large open lane created in the middle of the field just as in the split stack offense, while the other two-person team has one person ready to make a continuation cut and one person ready to make an additional cut to the handlers.
Finally there is a fifth strategy known as the Tri-Force, Trinity Play, or Triad, which breaks up the team into two teams of three and one option. Each team of three stays on opposite sides of the field. When the disc is being handled on their side of the field the two receivers make a series of tight cuts around the handler quickly moving the disc up the field in short increments. The other team of three stays on the opposite side of the field and slightly behind leaving them open for a dump while also clearing out the majority of the field for the option. The option needs to be the fastest player on the team because his or her job is to make deep cuts switching between a huck and dump option. The Tri-Force requires every player to be a competent handler and runner, but can be difficult to stop once it builds momentum.
Many teams are developing a Wildcat Offense based on the American and Canadian football setup. The formation is a variation of a traditional Horizontal stack, but involves exploiting mismatches by forcing play in the direction of the mismatch to create space for that person to make a deep cut for an easy point. The disc starts in the middle of the field, and the dump cut lines up as though to take a "handoff" (a quick dump.) this gives a number of options to the primary handler, including the fake dump to down field huck.
Many advanced teams develop variations on the basic offenses to take advantage of the strengths of specific players. Frequently, these offenses are meant to isolate a few key players in one-on-one situations, allowing them more freedom of movement and the ability to make most of the plays, while the others play a supporting role.
In all of these strategies, players making cuts have two major options in how they cut. They may cut in towards the disc and attempt to find an open avenue between defenders for a short pass, or they may cut away from the disc towards the deep field. The deep field is usually sparsely defended but requires the handler to throw a huck (a long downfield throw).